CopterX Shop - Heli - 450se ( CX450-SE-KIT )

450SE V2 Kit 143.69 GBP out-of-stock

In stock now...

In stock now as long as the green 'add to cart' button is still available.

The Kit comes with the CopterX factory seal and will arrive at your door step in the same condition unless you specifically request that we open it before sending to check the contents.

This is a bare bones kit and will only be able to fly if: 1, you put all the required electrics on the frame that - these are not included in the kit or option 2, you throw the pre-built head, tail, chassis across the room, or garden, by hand - this would not be the recommended way to fly this kit :)

Assuming that you select option 1 above and you buy this kit, you will need the following items to be able to fly. These are NOT included in the kit.

6 or more Channel RC Transmitter and Receiver. Wide range should work.
4 Servos. A Standard CopterX comes with Elf Servos; alternatives are the SG90 and the HXT-900 servos.
A gyro for the tail. The standard CopterX comes with a Elf Heading Hold Gyro. Works ok with some transmitters. Alternatives range in functionality, price range and speed/accuracy.
Battery. You should be looking for a couple of batteries that will fit onto the battery tray of the heli. A couple of 2000mAh-2400mAh batteries are a good guideline if you don't already have any batteries.
Charger. You need a charger capable of supplying a complete charge in about an hour. So you will need a charger that can at least 2.4Ah charge rate for a 2400mAh battery.

The Kit contains the following CopterX built assemblies:

Fully assembled head and swashplate
Fully assembled tail rotor assembly
Carbon Fibre chassis
Standard CopterX Canopy
One set of wooden CopterX blades
Set of Greases and Locktight for initial build (and maybe a rebuild)
Skids will need to be assembled and attached to chassis
Aluminium Tail Boom - Needs attaching to chassis and tail

CopterX.com related notes

Here are the specifications from taken directly from the CopterX.com site.

Features:

V2 Head Rotor Set (4mm Shaft)
V2 Tail Rotor Set
Auto-Rotation System
Rear Tail Servo Mount
Collective Pitch System
Tail Rotor Drive Belt System
Main Drive Gear with Cooling Fan
Professional Servo Control Lever Design

Specification:

Length:650mm
Height:230mm
Main Rotor:700mm
Tail Rotor:150mm
Motor Gear:13T/11T
Main Gear:150T
Autorotation Tail Drive Gear:106T
Tail Drive Gear:25T
Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
Weight(without power system):354g
Weight(including power system):690g

Package includes:

CX 450SE V2 Kit ONLY (Assembled without electronic parts)

CopterX.co.uk information

Price includes all European Import Duty and UK Taxes (Vat)
Product is already in the UK and will be with you normally within 48 hours of placing your order
Post and Packaging is £5.95 to the UK and £7.95 to any European country.

Other CopterX Heli Packages

We keep active stocks of the Ready to Fly CopterX 450 SE.
A custom made Almost Ready to Fly CopterX 450 is also available.